I know the background on these not being available but wanted to see if anyone could see a glimmer of hope in these becoming available again - or had any updates

I joined the club and got a LEO trade in. Love it so far but conflicted about leaving it stock or not Or just get another and pimp that one out.

Just got a call from Ruger, the mini 14 ATM stock I ordered back in April is ready and mine is shipping next week. The lady said it was not made by Samson but made by Ruger!!

I've had this Primary Arms RS-10R on my Hannibal Rail for about 4 months now, and after about 100 rounds, the Red Dot starts acting up, either dims down by itself or starts flickering. When I touch it, it is BLISTERING hot obviously because it's basically mounted on the barrel, the Hannibal Rail has no sort of heat shield, it is the heat shield lol. Basically, has anyone had this issue with their Red Dots mounted on their Hannibal Rails?.... If not, What Red Dot do you fellas recommend?

This is my second RS-10R, the first one has zero issues, ofcourse it's not mounted on a Hannibal Rail and the one that is seems to function perfectly when it's cooled off.

Hey y’all, I’m looking to get my first supressor specifically for my Mini 14.

Any specific 556 supressors I should look for / avoid?

Looking for something durable, budget is open. Priotizing for the best supressor I can find.

I got an adjustable gas block recently to go with a solid supressor.

Thank you!

\Not my listing**
I scroll Gunbroker for 20 round straight mags every so often to hopefully get lucky for a good price. Still unsuccessful but I did see this 25 round straight magazine listed. I can’t spend 200 bucks on one mag but I’m posting so maybe I can see it in a future post on here and shed another jealous tear.

I would like to purchase the Mini 14 Tactical with folding stock in 300 BLK but it is unavailable everywhere i have looked.

I am wondering if this is indicative of a chronic supply issue, the fact that Ruger is taking over the manufacturing of the stock, or something else. Basically, what is a reasonable expectation of when it might become available again?

Thanks in advance!

Was finally able to take the current build out to the range and Tac Bro's pic rail made zeroing a breeze because I could still look through the iron sights to determine where my green dot needed to be. Only needed to adjust it a couple of times after eyeing it in with the irons!

I recently acquired a Mini 14 series 180 with one of the only missing parts being the Gas port bushing, I'm wondering if any bushing from any series will work or if I should look for a specific one or if its even necessary to have one at all.

Hey guys so I had a tech sight on my mini (it’s a 586 series so it has the mini200 model I think) but I took it off to play with an LPVO. Didn’t like it so wanted to go back to iron sights. TLDR. I ended up snapping the screw off the main sight. And stripped one of the windage screws.

My question is, What size are the windage screws and the main T-Torx Screw.

So I got 3 Mini-14 mags as part of an auction lot I won. I identified the longer one as an actual Ruger Factory mag that they cut down from a 30 round mag.

Now according to what I've been finding online these are pretty rare and are considered collector items. Is this correct? Do you guys know how much they're worth?

But I'm also curious about the two 10 round mags I got because as you can see the two stamps on the bottom are completely different. Now is this just a random thing where one got stamped way harder than the other? Or does this denote a different era of magazine manufacturing? I also noticed that the dimples on the back of the two 10 round magazines seem really different as well.

Any help in this arena would be most appreciated.

Can’t wait to take it to the range

My rifle worked fine for a short while but after about the third time taking it out it started jamming. The casing remains stuck to the bolt and fails to eject and causes a double feed jam. I’ve cleaned and checked mags and haven’t found the cause yet

I have a a 585 model Ranch rifle and am looking at getting a barrel strut for it, but I have some questions and was hoping to see/hear from others that use this.

My barrel is 18 inches flat and am going to get it threaded soon, and probably get the front iron sight moved back a little bit to compensate. Im uncertain which size strut to get with that consideration. Anyone got experience with these that I can hear from?

A week ago I asked the ShopRuger.com customer service about when they would start selling the folding stocks again, with an ETA of January 2027. No additional details other than what you see in the screenshot.

It will literally be exactly 16” from tip of compensator/muzzle brake (maybe a hair more) to the end of the brass shelI rim/primer when inserted into the chamber. 13” of actual barrel but I will have it silver soldered or pinned and welded over the pin so it is part of the barrel. I will go back to original gas bushing so it will cycle with the reduced pressure.

I know, I know, I have no safety buffer but it is literally EXACTLY SIXTEEN INCHES. Even if for some reason it gets measured at 15.95”I have already been going through my defense strategy in court. There is something called the spirit of the law when it comes to splitting hairs. Sure, technically it is breaking the law but the spirit is that I am trying to comply and not going down to 15 or 12”, and the going under 16” was an accident. But that won’t even happen because it is 16” maybe a 1/16 more

Federal Ordnance Underfolder & Mousqueton A.M.D. Handguard on a 185 series GB Mini-14 with matching pre-ban magazine. Don't think I've seen a build like this before online.