Really digging this setup, also have a legacy lvaw in the work, gonna be fun shooting and comparing both with different suppressors

I bought one. Guy i know bought it around 5 years ago. Never fired it. The whole "the 320 goes off by itself" thing freaked him out big time. So he eventually decided to sell it. I got it for $100. I think I got a steal here.

I havent bern able to get to the range with it yet but I'm looking forward to it. I love the trigger.

I've manipulated the hell out of it though. And I cant get the striker to drop on it without pulling the trigger no matter what I've tried. So I think its good to go. Just wanted to hear from anyone who carry one. How do you like it?

The one I have is the X-Carry model I believe.

Taking this to a gunsmith to get the Ti mounted. This is my first suppressor. Honestly, it's underwhelming holding it in the hand given all the controversy around them. Can't wait to take this out to the range.

Keep on keepin' on. 🤘😝🤘

Anybody use a vortex defender ST on their 229 elite? Mine doesn’t have the front posts on the slide to lock the optic in tightly, am I supposed to just rely on the two screws? That seems kinda weird to me. Cannot find an adapter plate anywhere that is meant for this gun to fit a DPP footprint.

Bought a srd22x today. Put it on a p322. It's pretty cool.

ECM Precision's brand new R11 X12's arrived and boy o boy do they feel nice! Quality and ergos are absolutely phenomenal! The X12's took the place of my SIG P365X AXGs. The X12 is heavier and "fatter", which for me fills the hand better. Here are the measurements made with calipers, I couldn't get a good picture so I had to jot down the measurements. Pics of weights after the third picture and the last two pictures are of the SIG P365X AXGs with aluminum and brass LOK Grips.

\Slide used is a SIG 3.1" with Radian AB/RJ and Vortex Defender CCW Enclosed\**
**Second and third picture are the actual builds only difference is one of the mags, Magpul AMAG 17rd while the other has a standard 12rd**

Reach out to u/ECMPrecision_ARK for any questions about the X12

Grip Measurements:

ECM R11 X12 (built in grip panels)
2.00" (frontstrap to backstrap measurement)
1.130" (side to side measurement)

SIG P365X AXG (standard G10 grip panels)
1.834" (frontstrap to backstrap measurement)
1.190" (side to side measurement)

Grip Weight (grip mod and fcu/full build no mag)

ECM R11 X12
9.0 oz (grip mod and fcu)
1lb 6.9oz (full build, no mag)

SIG P365X AXG
7.9oz (grip mod and fcu)
1lb 5.8oz (full build, no mag)

I also took the weight of the P365X AXGs with aluminum and brass LOKs cause someone is bound to ask! LOL

SIG P365X AXG

Aluminum LOK grips (grip mod and fcu, no slide)
8.3oz

Brass LOK grips (grip mod and fcu, no slide)
11.1oz

Seems like Eotech pistol dots gets shlt on but got it for a little bit of a discount, why not. Dot is way crisper than Holosuns (only other pistol dots Ive owned/tried). Window almost same as an EPS, wish it was a bit bigger. Still psyched to try it out soon.

What do y'all use your Ar10s for. Also, I'm looking a FDE can, trying not to go over $700.

SiG tango MSR 1X6 only thing I added

Ar15 is a Windamn weaponry ww15

I have a 226 x carry legion and I love it. I want to get it ported with inline ports or something similar to that. Just for fun really. I love the way it shoots, I just want to see if I can get it closer to the new 226 x agency and my 211 in terms of shooting.

Do you know of anyone who does porting for that? Thanks in advance.

For yall that have this model, what’s the verdict?

She’s been in a case for almost a year and after getting the Acro painted this is where we’re at. (I’m balancing it on top still need the adapter plate) I’d appreciate recs on adapter plates btw if anyone has any TIA 👍

Just my M400 and P320 legion axg I put together.

Installed a Holosun AEMS Micro on my Norsso Fuse. The taller window and the clarity of the glass compared to my 507k makes it nicer to shoot.

The auto brightness actually works very well on the micro compared to the SCS model. On the SCS, it was always either too bright or too dim. On the micro, the auto brightness adjustments have been perfect in different lighting conditions so far. I have not had the need to switch to manual.

Also, it will mount on an Acro plate but is shorter. It comes with a filler plug to put in the front of the plate to fill that gap if you decide to mount it on a slide with an Acro cut or plate.

Can anyone who has recently purchased the Tango SPR with BDC1 Reticle looks like this?

Sig customer service swears that this is in fact the reticle that was "chosen" for this optic, but other instances of the Sig BDC1 Reticle I've seen do NOT look same:same....

I also asked what the MOA would actually be if it wasn't whats listed in the manual or website, and the answer was they are removing it (assuming that "it" is the MOA distances) from the manual.

Looking to pickup a P365 Flux setup. Local gun shops have them with a red dot and light for $1749.99. From what I am seeing, it would be much cheaper to just buy a P365XL and the flux chassis. Even after adding a light and EPS (which I ld prefer over the Sig dot) Id be well under the cost of a prebuilt. I am assuming I am missing something like addition parts needed.

What am I missing? Or is there just a big markup on building it?

I don't know how many rounds have been through it, I have personally only done around 500. It is a loaner from a family member to see if I want to go 9mm or not, and compare it to the P320 or other calibers. I have never inspected the bore this closely, I pull a bronze brush with CLP (I put the rod in through the muzzle end, attach the bronze brush on the camber end, and pull it from a handle that allows the rod to turn with the rifling), a nylon one, then patches until clean, then oil.

To me this doesn't seem like added material (lead, copper) but peeling/flaking. Any cause for concern for a range gun? I find $30 to $190 barrels (well, more for fancy stuff) as I don't want to return it in this state (I don't know if it happened while I have had it or not).

I want to blame my accuracy (lack of) on it, but I have been getting better, so I feel that is a me thing, not the weapon.

I had the opportunity to pick up a used 5.5" Rattler in 300 BLK, and I'm looking for advice and personal experiences on what suppressor to put on it.

I'd like to shoot subs and supers, and I'd prefer the can allow me to shoot semi vigorously...

My understanding is the Rattler can be a bit more particular than most, so understand options can be a bit more limited, and would love to understand been successful with or not. Thanks in advance!

11.5 Virtus 556, Sig SG553, 9inch Virtus 300blkout

Just got a Sig P365XL with Sig-Loc. Will the EPS Carry fit?

Bought as a P365 DH3 w/ poly grip. Added AXG Grip with LOK Veloce panels + EPS Carry. Planning on upgrading the barrel eventually.