r/gigabyte • • 4h ago

Six-month update: Thermal gel leakage on my Gigabyte RTX 5070 Ti AORUS Master continues

Thumbnail gallery
6 Upvotes

Six months ago, I posted about thermal gel leaking from my Gigabyte RTX 5070 Ti AORUS Master.

https://www.reddit.com/r/gigabyte/s/U68xAgN5Rv

I’m following up with photographic documentation showing that the leakage has continued.

For context, this card replaced my RTX 5070 Ti Windforce, which I had returned because of the same issue. The replacement AORUS Master came from a newer production batch, manufactured in November 2025, and was supposedly no longer affected. It has been installed vertically in my system since February 26, 2026.

As the comparison photos show, thermal gel has continued to migrate out of its intended position and accumulate near the PCIe connector. This documents an ongoing issue on my replacement card despite it coming from a later production batch.

My experience cannot establish how widespread the problem is, but it does show that newer production dates alone are no guarantee against it.

Having already returned one card for this exact reason, encountering the same problem on a premium replacement is deeply frustrating. At this price, I expect a cooling solution that remains in place without requiring regular inspections for escaping gel.

Has anyone received a concrete response from Gigabyte about a lasting fix, particularly for vertically mounted cards from later batches?

 


r/gigabyte • • 8h ago

Gigabyte FO27Q3 random black screen

Post image
3 Upvotes

r/gigabyte • • 4h ago

Support 📥 secure boot Z370P D3

2 Upvotes

I’ve run into an issue: to enable Secure Boot, I need to disable CSM. However, once I disable it, I can no longer access the BIOS. I’ve tried both holding the Shift key while initiating a restart and using a console command, but nothing works. My BIOS version is F2 Z370P D3


r/gigabyte • • 17m ago

Support 📥 Static noise after after plugging headphones to the monitor and changing refresh rate to 200hz

Thumbnail
• Upvotes

r/gigabyte • • 2h ago

After reinstalling nvidia driver you needto enable G-sync compatible indicator

Post image
1 Upvotes

If you have G-sync compatible monitor with G-sync enabled nvidia graphics card, Then you need to enable G-sync compatible indicator in nvidia cxontrol panel .

on nvidia control panel click on change resolution , then click on top dispaly menu,

put tick mark on G-sync compatible indicator

i have Gigbyte rtx 3060 12GB

LG ultragear 27GN800-B monitor connected with DP 1.4 version


r/gigabyte • • 6h ago

Check and mitigate CVE-2026-97631 on Gigabyte motherboards (e.g. on my X570 / AM4)

Thumbnail
1 Upvotes

r/gigabyte • • 10h ago

USB C Front Header Connection Issue

1 Upvotes

I saw someone else on this subreddit have this issue. Two months ago I switched over to AM5 and started using the b650 gaming x ax v2 motherboard. I am using a Fractal Torrent which has a USB C port. However, it has not worked ever since I replaced my old parts. I only need 1 USB C port (and the one on the back works fine) however it bothers me regardless. Help!


r/gigabyte • • 16h ago

No puedo desactivar el CSM support

Thumbnail
1 Upvotes

r/gigabyte • • 19h ago

GIGABYTE G5 KF5 (2023) won't turn on after closing the lid

1 Upvotes

Hi everyone, I’m looking for help troubleshooting my GIGABYTE G5 KF5 (2023) with an RTX 4060.
This is the third time in the last four weeks that my laptop has failed to turn on after the lid was accidentally closed during operation. The first two times, I somehow managed to get it working again within about an hour. This time, it has been almost a full day and it still won’t turn on.

When I press the power button, its LED flashes once, but the fans don’t spin. The screen stays black and there’s no POST. The power indicators light up when the charger is connected.

Over the last four weeks, the lid has accidentally been closed three times during normal operation. Each time, the same issue occurred afterward.
During the first two incidents, I managed to get the laptop running again within about an hour. I’m not sure what helped. I randomly plugged and unplugged the charger, held the power button, and tried turning it on again. After it started working, it ran flawlessly for several days or weeks.

Before the latest incident, the laptop had been working normally all day and was connected to AC power overnight. I believe I shut it down properly, but I may have closed the lid before the shutdown had fully completed. I’m not entirely sure. In the morning, I found that it wouldn’t turn on. The room temperature was around 19°C.

Current symptoms:
*The indicator LEDs turn on when the charger is connected.
*The AC power indicator stays solid amber.
*The battery indicator was initially green. After disconnecting the charger for about 30 minutes and reconnecting it, it turned amber, then later green again.
*The power button LED flashes once when pressed.
*The fans don’t spin at all.
*The screen remains black; there’s no POST.
*I tested all USB ports. When I press the power button, connected USB devices briefly receive power or start charging.

I’m running BIOS F12, released in July 2025.

What I’ve tried:

*Disconnected the internal main battery and tried starting on AC power only. No change.
*Disconnected the CMOS battery. No change.
*Disconnected both the main battery and charger, then held the power button for 60 seconds. No change.
*Reconnected both batteries and the charger and tried again. Same result.

I’m suspicious of the lid sensor or embedded controller (EC) because, on several previous occasions, the laptop shut down or entered a similar unresponsive state when an iPad case with magnets touched the lower-right area of the laptop.

Could the Hall-effect lid sensor be incorrectly detecting the lid position, or could the EC be getting stuck? Is it possible that closing the lid triggers a fault that prevents the laptop from completing its startup sequence, as if it still thinks the lid is closed?

I realize it could also be a problem with the EC, BIOS, power circuitry, or motherboard.

The laptop is about four years old. I replaced the thermal paste and both fans about six months ago.
Has anyone experienced something similar with the GIGABYTE G5 KF? Is there a way to test or disable the lid sensor at the BIOS or EC level? Could a stuck EC cause these symptoms, with no fans spinning and no POST?

If I manage to get it running again, what should I do first to diagnose or prevent this from happening again?

Any suggestions would be greatly appreciated!


r/gigabyte • • 20h ago

RX6700XT overheating!

Thumbnail
1 Upvotes

r/gigabyte • • 21h ago

Boa Tarde, estou com problema para atualizar minha bios. O modelo da placa mae é B550M DS3H AC, a versão atual da bios é F3d, não encontro no site da gigabyte o drive correspondente da F3D, alguem ja passou por isso ou sabe como ajudar ?

Post image
1 Upvotes

r/gigabyte • • 22h ago

Gigabyte B850 Gaming X WIFI6E - VGA LED error

1 Upvotes

I upgraded my PC from a 7700k with a 4070 Super to a Ryzen 7 9800x3D and the 4070Super.

Specs are:
Ryzen 9800x3D with a Gigabyte B850M Gaming X WIFI6E,
32GB Patriot Viper Venom DDR5-6000 CL30
and 2 m.2 SSD ́s.

After I had assembled everything I wanted to start and there the motherboard got stuck on the VGA Error LED after the RAM was initiated and no picture appears.

BIOS updated to newest version 11e.

CMOS Reset no change,

with no GPU and trying to boot with the iGPU no change,

other cable with monitor no change,

other GPU also no change.

Tried to boot with only on Stick of RAM.

I disassemble everything again and put everything back together but I'm slowly running out of ideas.

New Motherboard for testing is already on its way.


r/gigabyte • • 20h ago

Annoucements/Mod Post 📢 [PRODUCT SPOTLIGHT] GIGABYTE EAGLE: 16-inch 165Hz gaming laptop with RTX 4050 graphics

0 Upvotes

Looking for a gaming laptop that can handle everyday use and gaming without taking up your entire desk?

The GIGABYTE EAGLE GL6J combines an AMD Ryzen 5 processor with NVIDIA GeForce RTX 4050 Laptop GPU graphics in a 16-inch chassis.

Here are the key specs:

Performance

  • AMD Ryzen 5 Processor
  • NVIDIA GeForce RTX 4050 Laptop GPU with 6GB GDDR6
  • Dedicated MUX switch
  • Windows 11 Home

Display

  • 16-inch, 16:10 IPS display
  • 1920 × 1200 WUXGA resolution
  • 165Hz refresh rate
  • 100% sRGB color coverage
  • 400 nits typical brightness

Memory and storage

  • DDR5 4800MHz memory, expandable up to 64GB
  • Two SO-DIMM memory slots
  • Two PCIe Gen4 M.2 slots
  • Storage support up to 4TB PCIe NVMe M.2 SSD, depending on configuration and region

Connectivity

  • HDMI 2.1
  • USB-C with DisplayPort 1.4 and Power Delivery 3.0 support
  • Wi-Fi 6E and Gigabit Ethernet
  • Dolby Atmos audio

The 165Hz display is worth a look for fast-paced games, while the MUX switch, upgradeable memory, and dual M.2 slots provide additional flexibility for users who want more control over their setup.

Shop now on Amazon!: https://a.co/d/08b8sLTe

Which feature matters most to you in a gaming laptop: display refresh rate, GPU performance, or upgradeability?