Water buildup in the floorboard (not coolant) and I haven’t done an in depth inspection, but there isn’t any obvious leaks anywhere. Anybody had this happen or have any ideas?

Murilee Martin of Hagerty found what I think is a 1976 Dodge Kary Van with a cool musical past in its Final Parking Space.

Anyone running these yet?

Welp, it finally happened. I picked up an '03 Ram 1500 with the 5.9L Magnum 6 months ago with 94k miles. I'm currently working through maintenance as I daily drive it. Noticed a small drip on the ground the past couple days. My initial thought was timing chain cover gasket broke but it could be something upstream dripping down. Not sure exactly what's leaking. I think the famous intake plenum gasket has finally given up now that I'm burning oil. Thoughts? (Note this is positioned looking at the bottom right of the front side of the engine)

Benny Kirk of HotCars remembers the Chrysler Corporation Slant Six engine

I’m wondering how I can sell my ‘99 Ram 2500 with towing pkg without having any knowledge about engines/mechanics? It’s at 68k miles and I bought it from a dealer who got it in Arkansas so no rust to mention.
Paid $18k and I only needed it to pull a camper I sold soon after and beautiful truck I love just sitting now for a couple years except to have an occasional drive to charge battery.
I’m afraid of B.A.T. because I don’t have any maintenance records from dealer and it runs like a top so, I haven’t had to do anything except buy some light bulbs.
Any help is greatly appreciated. (Female here!!)

Hey guys i wanted to ask if anyone knew how to bypass a AC compressor on a 2004 ram 1500 5.7? My Ac compressor started to go bad making a bad squeaking noise when on and even some times while its idleling. Since it hasn't really been hot I just want to bypass it to spring next year but I dont know how to properly route it without the AC compressor or what belt to use. Any tips on what to do?

I’m currently fixing up my 2001 Dodge Ram 1500 interior and have had this glove box missing for years. No issue finding a glove box online but the mounts that I circled are damaged. Anyone run into this and have a solution or recommendations? I’ve searched online for bottom plastic replacement and haven’t had any luck, my next move was checking out the junk/salvage yards and maybe I can find one still in decent condition.

The OTD price is after all taxes fees and their stupid protection package that I negotiated down to 1400 instead of their original price of 2500.
I can't get them to take that protection plan all the way off but this still seems like a really good deal, am I missing something or should I go for it?
Base MSRP: 68,580
Towing technology package: 1595
Cold weather group: 245
5th wheel prep package: 645
Rebel equipment group level 2: 6495
Diesel engine: 12995
Power sunroof: 1195
2.4kw on board power system: 1295
Destination charge: 2195
Total MSRP: 95,240

Hey everyone I'm new to ram ownership buying this grandpa owned 2003 3500 quadcab short box 3rd gen. Unfortunately I went tapping around checking for rust and found this Perferation roughly 4-5 inches in the frame at the low point under the rear passenger door area. Seems to be localized to a 26~" area including the hole on the side. What should I do?
These pictures are post smashing with a hammer and picking at. The frame also retains factory thickness up the sides at the air holes.

Robert S. Miller of r/MoparInsiders spent one week with a Chrysler Pacifica. And he just got done with a 2026 Ram 1500 Warlock 4x4.

My TRX was taken in broad daylight in a crowded Costco parking lot on a Sunday. They were clearly professionals, they swapped the license plate and everything. Using the GPS tracker I had on the vehicle, I was able to locate it and recover the vehicle within 12 hours of the theft, which from what everyone (police, detectives, insurance) told me, is EXTREMELY lucky. The scoundrels did thousands of dollars worth of damage to the interior trying to locate the tracker, and I am not leaving it to chance that it doesn't happen again.

I'm looking to add real anti-theft to my TRX and I’m stuck between IGLA and Ravelco. I’ve seen a lot of TRX thefts lately and want something that actually stops a drive-away and cannot be hacked or undone. Since both systems are structurally different and seems like both have their own pros and cons, for those who’ve run either (or both):

• How’s day-to-day use? Does the PIN/fob or the plug get annoying? *I know inconvenience is better than headache of having it stolen, but I am trying to compare the practicality of both systems*
• Any electrical issues, error codes, or dealer service headaches?
• Has either one actually stopped a theft attempt for you?
• I’ve seen videos claiming Ravelco can be bypassed. Is that overblown?
• Did you layer an alarm like Compustar on top?
• Did either of these give you any issues with your vehicle warranties?

Any advice helps. Appreciate any real-world experience!

I don't speak English, so I apologize in advance.

My 2018 Dodge 1500 RAM was connected to a cell phone, which broke. Now, when I connect my new phone after turning it off, it always forgets the new one and reverts to the old one, no matter how many times I delete it.

Does anyone know where i could obtain this or something similar? Its discontinued

This is my baby boy, Rodney. I seemed to have ran into the biggest "wtf?" of my career.
Had the torque converter fail in it along with the transmission backing off the engine when I bought the truck (thank you previous owner for poor maintenance !). Replaced the torque converter, had the issue of nicking the Crankshaft Position Sensor so she acted HORRIBLY. Replaced the sensor and it ran fine for about 60 miles. Got home, the truck started VIOLENTLY (and I mean it could've shaken a tampon out of a nun) bucking in reverse and drive, but NOT while idling. Would start up and roll over and fire up fine until | let it sit for about 10 minutes. Went out to fire it up and the starter won't engage. Whenever I turn the key it makes an electrical whirring noise which usually means my starter went out but it's a BRAND new starter. Truck has thrown me for a loop and now I'm just looking for second, third, and maybe fourth opinions. Thank you !! (And yes, I know I signed up for every ounce of this the moment I bought a dodge...)

Thinking of changing rubber to some Nitto Ridge Grapplers. Anyone have these and thoughts u like to share .

Please somebody help me with my 2nd gen ram!! I’m no mechanic and it’s making this horrible noise. I’ve talked to a few locals here and they seem to think it coming from my harmonic balancers. I have no idea what those even are.
Has anyone else ever heard this sound?
(iCloud link for video&engine-noise)
(turn volume up!)