03 Saab 9-5 Aero Sport Estate

It looked like a small amount of rust on the outside but they had to patch the inner wheel wells in a lot of spots. It was at a body shop for four weeks.

Both in the same parkinglot

Because it sure doesn’t look like it’s big enough to swallow all of that

Hi guys just wondering if it would be worth the effort building my own cone filter set up on my ttid 93, don't really care for power all that much just wondering if they sound nice and if the maf sensor Will act up if I do go ahead with it

Thanks guys

Hey everyone, recently my old head units aux port died on me and I'm looking for a replacement radio. I loved the stock one and I'm not looking to upgrade but I seem to be having trouble finding one that has been divorced from its original vehicle with a tech2 as it seems like that's the only direction to go. I'm not having any luck finding one as all available units were just removed from the original car. does anyone have advice for me? Thank you

As you can see from the pictures, a family member's SAAB keys are totally mauled, it's a 2008 so it has seen 20 years of use and abuse.

The issue is that locally locksmiths struggle to find these pieces of keys, so I was looking at aliexpress.

I don't know wich model of this key I have to buy specifically, could you help?

This is the aliexpress link I was looking into

4Button Smart Remote Key 315/ 433MHz for SAAB 93 9-3 2003 2004 2005 2006 2007 2008 2009 2010 2011 ID46 PCF7946 Chip LTQSAAM433TX

https://a.aliexpress.com/_EIo6ZTk

I have a 91 900 turbo, trying to figure out what this hose goes too, appears to be leaking air. Not sure if it’s fixable or needs to be replaced. Also included a connector which I am not sure is a dud or is supposed to be connected to something? It is near idle air control valve however the IAV is plugged in.

I have a 2000 Saab 9-3 with a B234. Under load if I give it anything past 80% gas it misfires and pops and bangs from the exhaust. Nothing comes up on OBD-II and I was wondering if anyone had the same problem and found a fix.

Rare Saab Turbo 18” Alloy Wheels – Set of 4 – $1,200 USD

Rare set of 18-inch Saab Turbo wheels for sale. These came off my car, which was written off following last year’s hailstorm.

A great opportunity to pick up a rare set of Saab wheels that don’t come up for sale very often. These would be an excellent candidate for refinishing to bring them back to their former glory.

Details:

* Set of 4 Saab Turbo 18” alloy wheels
* Original Saab centre caps included
* All 4 wheels are straight
* No repairs have ever been done to any of the wheels
* Cosmetic wear present; ideal candidates for refinishing
* Winter tires currently mounted, but tires will be removed unless the buyer is interested in purchasing them as a winter tire package

$1,200 USD

I’m not in a rush to sell, so I’m happy to hold onto them until the right buyer comes along. These are rare wheels for Saab enthusiasts looking for an original set to restore or refinish.

Message me if interested. Serious inquiries only.

Please confirm fitment for your specific Saab model before purchasing.

As the title says. I own Saab 9-3 1.8t 2002 (it's gen II), and it has strange and big issue.

Main symptoms: missfires, lots of unburnt fuel from exhaust.

Now about how it gets more complicated - alongside to the main symptoms, there is clicking noise from ECU, when engine is turned off, and hissing sound from around vacuum pump/injectors when it's running and unstable. OBD II tool shows no codes except from missfire, broken lambda probe behind the cat (I'll fix it eventually) and too high voltage. I checked, the voltage is too high by 0.07, so it's marginal. The most important thing - no code hinting what could it be. Next thing - it all is stabilizing at higher rpm's, from around 2500 and higher it's as if nothing was wrong.

Edit: some more symptoms - on low rpm car sometimes chokes and turns off; throttle lag happens sometimes

Also, the fuel level sensor is broken, but this broke long time ago, idk if it's related, honestly doubting it, but who knows.

The stuff I did to the car not that long time ago - new vacuum pump seals, new power steering seals, new battery, new spark plugs, new engine and balance timings, new water pump, regenerated clutch, cleaned MAF sensor, regenerated turbo, cleaned intake manifold, installed ECU protection spacer, new coolant reservoir and I think that's all the stuff that happened under the hood. Timings, clutch, turbo and water pump were done by the shop.

Now, I have a few possible ideas, but I still feel the need to hear what others think.

It could be ECU, but afaik there should be some obd code indicating it most of the time - in my case there is no such thing, that's why I think it might not be ECU. Not for sure, but it is just my intuition.

As for other possible culprits, I figured it could be - vacuum leak, faulty injectors, faulty fuel pump, faulty MAF sensor.

Now, I'm open for your opinions and ideas, help me save my baby 🥺

I have a 9-3 2004 B207L reprogrammed for ethanol. Some days there is no engine light and no limp and some days there is a fixed light and a limp mode but to a certain speed and then the car takes off normally. so the only problem is being too slow from a stop but other than that it drives normally. I filled up with 95 the other day but same symptoms. What should I test/check for? thank you for your help!

Automatic pre facelift 9-5 Aero, rare car and a rare spec. Black heated and cooled leather seats, one owner for 20 years before me with loads of history, like most old cars it needs bits and pieces to be perfect but it's a good example of a really rare car.

There is an oil leak mentioned on the MOT so I had a look underneath it and it's the actual sump plug so I would guess someone forgot to change the copper washer when the oil was last changed.

I have had this for a year and only covered about 5000 miles, it's on about 185k now and it runs really well, it pulls hard under load, it's a really nice car.

It has premium tyres all round as I don't run cars with cheap tyres. The Continentals on the rear have covered about 2000 mikes maybe less.

It won't come with the roof bars or roof box.

I got the radio on the left. But dont like the touchscreen. Would like the old radio on the right. People say it is not the right one. But I can just Connect it. Only Problem is it seems to be locked.

It is a 2003 Saab 9-5

Can someone advice me?

Recently discovered this Saab Original Towstrap bought from the SaabANA dealer in Trollhättan.

Still features the original warehouse location, never been used. This was an accessory that was available to be purchased seperately.

Any ideas of what it could be worth to an enthusiast?

Hey guys,

3 months ago I went from exclusively riding a motorbike all year around to buying a car because my job requires me to take 2/3 hour trips every now and then and in the winter months I stopped feeling my fingers after the first 30 minutes, and riding in the snow isn't great for my health either. Now, I've grown up with Saabs and always loved them. For me it was a pretty simple choice to get a 9-3 for my requirements, and ended up with a beautiful 3 door 2.0i. Apart from some pretty major unforeseen repair bills I've had nothing but joy from my new old car, but there's one teeny tiny first world problem that bothers me on these 2 hour trips, and that's that it doesn't have a proper cupholder in the front (it does have the little dimples in the glovebox but I think it just needs a little brake or turn to soak my glovebox and carpets in coffee if I put it there).

Now, I've looked around a bit online and noticed that there were some solutions to this, such as an aftermarket middle console with built in cupholder, or 3D printed solutions, but they all seem a bit out of place in my interior which I just cleaned up from the previous owners' air fresheners and bright flashing FM transmitter. So I'm wondering if anyone else has a proper solution to my very minor problem. It doesn't have to be a super cheap solution, I'd rather spend a few bucks extra and have it looking nice than have a cheap solution that looks out of place and/or breaks after 4 uses. Cheers in advance!

Hey everyone, I have a 2003 Saab 9-3 SE convertible (OG, manual) and recently had this happen:

• The engine cranked at normal speed but wouldn’t start.
• Eventually it started after waiting a bit, and sounded completely normal. Once it fired up, there was no struggling or rough running, and it restarted consistently afterward.
• While driving, I shifted into third and it felt like the engine stalled. It wouldn’t restart immediately.
• After a couple of attempts and waiting about 10 seconds, it started again and drove normally.

There’s no check engine light, and I checked with an OBD scanner and found no codes. The service records also show that the fuel pump was replaced recently.

Has anyone experienced something similar? And is there any way to troubleshoot this issue?

As is well known, when Saab's designers were deciding what the Saab 90 should look like, they couldn't decide how to weld the Saab 99 and the Saab 900 together: the front from the 99 and the rear from the 900, or the other way around. In my opinion, the idea with the rear from the Saab 900 turned out to be the more successful one.

I’m waiting at a Thai restaurant on the Rubenslaan in Utrecht and a 9-5 Estate with a dump valve just drove by. If it’s someone from here, care to share your specs?

Trying to replace it but every time I look it up It’s very hard to tell if I’m looking at the right part I already ordered one and it ended up being for the intercooler 🤦‍♂️
Is there a part number or name for this specific pipe other than intake hose lol

Hi, I need help diagnosing my 2006 Saab 9-5 Vector 1.9 TiD diesel automatic.
After driving for around 7–8 minutes, I stopped and switched off the engine for 6–7 minutes. When I restarted and drove off, the car felt sluggish and accelerated more slowly than usual. After switching it off again, it would no longer start.
The starter turns the engine over normally, but the engine won’t start.
My battery was recently replaced. My Biltema OBD-II scanner worked about a week ago, but now it displays “Linking error” and cannot connect to the car.
Could you check the cause of the starting problem and why the diagnostic scanner can’t connect? I’d like a diagnosis and a cost estimate before any parts are replaced.
Thank you.