I can still remember the 1st day that I bought this car. Brought me so much fun and I keep on driving it everyday.

Just finished my v1 build! Next is wheels and flex fuel. Instagram: zd8ryan

eBay 3pc front lip
extreme online store sideskirts
Paint matched front bumper lip
Isr exhaust + catless fp + tuned by boosted performance
And bc coilovers with 20mm spacers.

Totaled 🙂‍↕️

Enkei TS10 17x8 with Bridgestone Blizzak Icepeaks!

Just received my gr86. Noticed the taillights and bumper and not perfectly aligned. A lot more space on the left side and very noticeable from certain angles. Is this normal?

New to the sub here’s my gr86 ❗️

I daily my GRocery getter. With the winter season approaching, I’m looking at changing to winter or all season tires, and was wondering what tires you all have used. Bonus points if you live in Kentucky like I do or in a place with similar weather.

I want to know why almost everyone I see from the Americas wants to get rid of their amber side markers? I live in the Middle East and these cars came with the clear side markers from the factory and I'm leaning more towards the amber ones. 😅

Picture for attention and reference

Always nice when another 86 shows up at your apartment complex unexpectedly. Had to get some pics!

I can't find it anywhere, is there a way to alter the turn signal volume? I had surgery inside my ear and I can't hear the click click that well, I don't want to be that guy driving down the road with his blinker on

This sound just recently popped up as I was parking at work, the sound gets increasing louder as I slow down and only happens on the Front Left side. Is it a bad ball bearing or something else? The car was in storage for about 9 months and just recently had a rotor/pad change. Also I’m in HKS Hypermax S’s if that helps

18x8. Stock tires and STI springs.

My 25 BRZ

2026 Subaru BRZ tS - stock 18inch wheels and suspension.

Installed the crash bolts into the top hole of the front strut to knuckle mount, and set it to the maximum camber position and this is the results I got. Increased camber to just over 1 degree negative. Started from slightly positive on the left and just barely negative on the rear.

At my first alignment I set the front toe to 0.5mm toe out per side. After installing the camber bolts my toe went to roughly 0.5mm toe in per side. So adding the camber bolts made my wheels point 1mm inwards from where it was set. This was reset back to 0.5mm toe out at the alignment.

Just posting to add another data point of what the factory crash bolts can achieve out of the front strut.

Is anyone else running work shigoku 18x9.5J +38? I’m looking into buying a set but I would like to see some confirmed fitment.

I’m mostly looking into bronze twin 5 spoke wheels, so any recommendations better than Work Shigoku are also welcome!

Bit by the mod bug lol added RCE yellow springs along with pedder top hats, whiteline upper camber bolts, arp 3 in wheel studs with a 10mm garageline spacers in the front only.
Last few pics are right after pick up and heading into work before adding spacers in the front only.
Can probably up to a 15 mm spacer in the front but not sure yet.
Also added the driven media F1 third brake light mod and the additional 4th brake light kit. Now onto seat time!

I know the springs haven’t settled yet as it’s only been about 260 miles since install but wow these ride very similar to stock in terms of quality. Def a tiny bit more NVH but really can barely tell. I’ve always wanted some RCE stuff from way back when I had my Va WRX so I’m pretty satisfied with it! The quality is fantastic, just wish I got some stickers with the springs 🥲

Alignment specs are L/R Camber: -2.35/-2.31, Rear Camber: -1.96/-1.73

Mach V motorsports in Sterling did the suspension while I did the studs(they wanted waaaaay too much for my liking) lol

First post in here and was wondering what exhaust everyone is running?
i’d like something that’s a nice deep tone but not too obnoxious for the car itself. I know most people go with AWE but i don’t like the farty cold starts which makes me lean more towards the Borla S type. Let me know what you guys recommend!